Ed Venator

Ed Venator

I build robots.

Abby’s Network

less than 1 minute read

Note: Router is a Linksys WRT54GS2 v1.5, which cannot be DD-WRT’d, so it’s running stock firmware.

IP Addresses

abby-router 192.168.0.1

abby-cRIO 192.168.0.100 (Need to confirm connectivity. Had to swap an ethernet cable today)

abby-pc 192.168.0.50 (Still need to set this. Currently DHCP.)

IRC5 192.168.0.150(Still need to set this. Currently DHCP.)

DHCP 192.168.200-255

Wireless

SSID: abby

Encryption: WPA2

Password: (Standard lab password)

Share on

Twitter Facebook Google+ LinkedIn

You May Also Enjoy

The Weirdest Bug I Found This Week

5 minute read

At work right now, I’m in the process of building software made by another contractor on the project. The software was originally written for Ubuntu 12.04, a...

E-Stop Circuit Upgrade: Schmitt Trigger Inputs

1 minute read

To the SN74HC7001N Schmitt trigger AND gates I ordered arrived. These hysteresis on these should solve the flaky e-stop problems I’ve been having. As noted i...

It’s Gotten Quiet Around Here

less than 1 minute read

Edit (December 24, 2015): I’m backfilling posts from my lab notebook to this blog. The backfilled posts are back-dated to match the time they were written.

Running the IRB-120 in the ROS Arm Navigation Warehouse

less than 1 minute read

This post is part of a series of posts adapted from the Engineering Notebook I kept while building ABBY for my masters thesis. Since I wrote these posts thre...